Germinate Weed Seeds In Water Cup

ILGM

Buy Cannabis Seeds Online

Figuring out how to germinate weed seeds isn't that hard, but choosing the right method can determine exactly how high your success rate is. With various methods on how to germinate marijuana seeds for beginner and advanced technique, it all just comes to your preference on what type to use. I was going to just put my seeds in a cup of room temp water to germinate……..But ive read that this is not a good idea, because if the seed is in the…

How to Germinate Weed Seeds – Tips and Methods

Germinating cannabis seeds isn’t a complicated process, although it does require a few specific parameters in order to happen successfully. If you’re reading up on how to germinate weed seeds, you’re in the right place; it’s a relatively easy process, you just need to have some patience on hand. The first thing to keep in mind is that your seeds are going to need water, heat and air in order to germinate.

How to Germinate Weed Seeds – Basic Parameters

Water (moisture)

Moisture is one of the three elements required to successfully germinate cannabis seeds; it essentially helps the seeds to expand and therefore break their shell. Over-watering at this stage can be fatal for your seeds, although harder-shelled and older seeds can take longer to soak through, so some patience is required.

Heat

This can be the hardest thing to work with, because temperatures that are either too cold or too hot will mess with your seeds and they won’t germinate. Springtime temperatures are generally what you should be aiming for – seeds can still germinate in colder temperatures, although they can take longer.

How to Germinate Weed Seeds – Germination Methods

There are many different germination methods that growers tend to use, all of which involve water and heat, although they’re not all as effective as others. Some people prefer germinating by planting straight in the ground, using starter cubes or by letting them soak overnight, although our preferred and recommended method is the paper towel method using either plates or an opaque kitchen container. We’re going to give you a brief rundown of the other methods, alongside their pros and cons.

Starter Cubes

This method is more reliable than others, and they make germinating quite easy. All you have to do is place your seed carefully in your seed plug and follow the instructions when watering; different brands and models have different watering instructions.

Some cubes are made out of peat and soil, and you can move them straight into your flowerpot once they’ve popped. However, hydroponic growers can use rockwool cubes which can hold quite a lot of moisture.

One of the downsides to using starter cubes is that they’re not very handy if you only want to germinate one or two seeds, because they’re usually sold in packs of 50 or more, and once they’ve been opened most cubes tend to dry out within a couple of weeks. Another downside to Rockwool specific cubes is that they’re bad for the environment, can be bad for your health when inhaled, and they’re not the best method for new growers.

Direct Planting

Other growers prefer to get rid of the middle man and plant their seed straight into their first flowerpot – it’s essentially how it would be done in nature, so why not follow the natural order? One of the pros when it comes to planting straight in your growing medium is that you don’t have to stress out your little seedling when transplanting, although it can be a bit harder to get the humidity right and you need to bury it just the right amount so that it can sprout.

Overnight Soaking

We highly advise against using this method, as it’s incredibly easy to accidentally drown your seeds. This method involves soaking your seeds in a glass of lukewarm water – it can be any type of cup, although people usually use a normal glass. This method can be effective for much older seeds or for seeds that have abnormally thick shells.

There are a few myths surrounding germinating in water overnight – some people say that if your seeds sink, they won’t germinate, however the truth is that most seeds start off by floating and then as they soak, they sink to the bottom of the glass. This has nothing to do with germination indication.

How to Germinate Weed Seeds – Paper Towel Method

This method is the method we recommend all readers and customers use, as it’s the one that has proven to give us the highest germination rate. We’re going to give an in-depth step by step guide on how to use this method. Keep in mind that you can skip the rooting hormone part if you prefer all natural results, although X-Seed does provide impressive results to start with.

Material Needed to Successfully Germinate seeds

  • Kitchen paper
  • Opaque plastic Tupperware or two plates
  • Viable cannabis seeds

We’re going to go through the X-Seed method – if you want to skip this, you can simply skip the steps involving X-Seed and place your seeds straight into your paper towel as stated in step 4. Before you start, make sure you have everything you need at hand, so that you don’t have to waste any time looking for stuff. Find the best strains at our Cannabis seeds – Buy Marijuana Seeds section.

Step 1: Soak the seeds

Submerge your seeds in your B.A.C. X-Seed liquid for an hour. Give it a stir every now and then so that the seeds are thoroughly soaked.

Step 2: Germination

While your seeds are soaking, you’ll need to prepare your paper towel and plates (or opaque Tupperware). Make a makeshift “bed” on the bottom plate with damp kitchen paper, but make sure it isn’t soaking. We tend to use 3 layers of kitchen paper; wet the paper and let it dry without wrinkling it, hanging it out kind of like a t-shirt so that all of the excess water can easily drain out. No need to worry about drying it, as you want the kitchen paper to be damp.

See also  Growers Choice Cannabis Seeds
Step 3: Separation

After your seeds have been in the B.A.C. X-Seed liquid for an hour, by using a spoon you can carefully extract the seeds from the liquid and spread them evenly across the bottom of your plate or container. An even spread is important, so as the roots of each seed do not get tangled – about an inch apart is good.

Step 4: Cover the seeds

Once you have all of your seeds nicely placed on your plate or in your container, cover the seeds with another layer of damp kitchen paper, similar to the first layer that you put on the bottom. At this point, your seeds should be completely covered.

Step 5: Take care

Once you’ve finished covering your seeds with paper towel, cover them with another plate or put the lid on your container; if doing this in a container, the paper shouldn’t dry out as fast. A mistake made by many growers is that they add too much water to their paper towels if they’ve dried up, but by using a spray bottle you can moisten it some more without overdoing it. If your container is transparent, all you have to do is line the inside so that absolutely no light can get in.

Step 6: Temperature adjustments

Once you’ve isolated your seeds from light, you should leave it somewhere with a nice, neutral temperature. During winter it’s often harder to find a good spot, so you should try and find a heat source that isn’t excessive. You can use a computer modem, or even a softly powered electric blanket. Items like play-stations can get too hot and could end up cooking your seeds, so take care where you put them.

Step 7: After care

Once your seeds open up, they’ll shoot out a small, white root. This means you need to be extremely careful when handling them. Don’t leave them for long because once they’re open they should be moved to soil.

Step 8: Moving to soil

Now that your seeds have officially germinated. Now you need to move them to the medium in which they will remain for the rest of the growing process. Germinated seeds usually grown in soil, but rockwool for hydroponics is also a good option growing. Or even a coco jiffy if you want to cultivate in coco coir. In this article we’ll be dealing with the most common method: planting seeds in soil.

How to Germinate Weed Seeds

Start by filling a small pot with soil, no more than half a liter. Water it before even thinking about planting your seed. Once the soil is damp enough to weigh down the plant pot, use the tip of your finger to create a small 0.5-0.1 cm hole in the middle of the soil, and deposit the seed in the hole with the root facing downwards. Then, cover the seed with a little soil so that it’s just under the surface. The last step in this process is to put your plant pot in the sun or under your lamps (wherever you’re planning on growing it). Within a couple of days you should see that first sprout, that will keep on growing right until the end. In some cases, it may even take a matter of hours.

Keep an eye out on our follow up article on soil preparation for growing cannabis.

Germinating Marijuana Seeds in a Water Cup

We have seen many methods of growing marijuana seeds. From the most basic to the advanced technique, cultivating marijuana is a well-loved hobby for beginners and experts alike. With various methods on how to germinate marijuana seeds, it all just comes to your preference on what type to use.

Why You Need to Germinate Marijuana Seeds

Marijuana germination is the procedure where a sprout breaks out of the seed’s coating. The sprout looks like a small white tendril and it is extremely delicate. It is the plant’s initial root and it is often referred to as the “taproot.” All the upcoming roots created by your marijuana plant will grow from the taproot. This means that the taproot is the building block of all your plant’s potential roots in the future.

The taproot, together with a few other tiny young offshoots around it – will grow and develop into longer and stronger roots. They will push the seed above the ground until the shell emerges from the surface of your growing medium and grow its first leaves known as the “cotyledons.”

These initial round leaves will sprout from the inside of the marijuana seed. The cotyledons developed as part of the plant embryo in the seed, which means there’s no need for the marijuana seedling to grow them. The sprouting first leaves are the ones that break open the shell after the taproot cracked it open.

How to germinate marijuana seeds

Marijuana seeds need three things to achieve successful germination and these are heat, water, and air. Using these, you can perform the simplest and easiest technique to germinate your seeds. But first, you’ll need paper towels, two clean plates, and marijuana seeds.

Here’s the process of this germination technique:

  1. Take your paper towels and soak four sheets in the distilled water. The sheets should be saturated with water but they shouldn’t have any excess dripping water.
  2. Get two sheets of the saturated paper towel and place them on one plate. Then, arrange the seeds on top of the plate with at least one inch of space between them. After that, get the remaining sheets of paper and cover it on top of the seeds.
  3. You need to make a dark protected area for your seeds. You can do this by covering the top with the remaining plate. This will create a dome-like space for your seeds to germinate.
  4. Lastly, keep the area warm and follow the correct temperature between 70-90°F.

These are all the steps to germinate your marijuana seeds. Once you completed each step, you only need to wait.

See also  Free Marijuana Seeds

Don’t be impatient because this stage is crucial for the overall growth of your plant. Make sure you check the paper towels from time to time. If the papers are starting to lose their moisture, spray a little amount of water. Maintaining the proper amount of moisture around your seeds will keep them healthy and happy.

Note: each seed has different germination speed. Some may take longer than the others and that’s normal. You can tell that your seed has germinated once it breaks and one sprout begins to emerge from it. This sprout is the taproot of your seeds and it will be its main stem. Once you see the taproot growing from the seeds, that’s the indication that your germination process is successful. By this point, refrain from touching the seed or the taproot since it can disrupt their development.

Proper Way of Transplanting Germinated Marijuana Seeds

When the germination stage passes and your marijuana seeds have grown their taproot, it’s time to transplant them to a growing medium of your choice. Just like how you treat your seeds during germination, you also need to be extremely careful when transplanting your little plants. Remember, they are not yet fully-grown which makes them powerless against stressful factors.

Follow the steps below to properly transplant your germinated marijuana seeds:

  1. Prepare the growing medium in which you will transfer your germinated seeds. You can start with small 2-inch pots since they are cheap and easy to access. What you need to do with the pots is to fill them with coarse and light potting soil. Then, place a hole in the middle, which is at least a quarter-inch down the soil using a pencil or pen.
  2. When your growing medium is ready, it is time to transfer the seeds. Using a pair of tweezers, slowly pick up the seeds and place them in your growing medium, specifically inside the hole. Make sure its taproot is facing downwards. Then, gently cover it with soil.
  3. Next, you need to water the soil using a spray bottle. This will provide moisture in all areas of the soil without the risk of drowning your seeds. Remember that you should only provide sufficient water to your seeds because overwatering them can kill the little sprout.
  4. Lastly, you need to check the moisture level and temperature of the soil to maintain the good condition of your seeds. After a week, you can expect the seedlings to start appearing in your growing medium.

Germinating Marijuana Seeds in a Water Cup

If you want a cool, new method to germinate your seeds, the following has a 100% success rate. Though the results may vary, just like what usually happens to the all-natural growing method, this one is easy which is perfect for first-time growers.

First, you need the following materials before you start:

  • 1 plate
  • a glass of distilled water
  • paper towel
  • tweezers
  • pill bottle

A little reminder before you start with the method is you should always use distilled water.

  1. Never utilize tap water because it carries impurities that might harm your seeds. Lastly, see to it that your germinating space is situated inside an enclosed room that has a temperature of 18 to 25 °C. The following are the steps to follow on how to germinate marijuana seeds in a water cup:
  2. Place your seeds inside a cup or glass of distilled water. Some will instantly drop to the bottom while others will float. Leave them for a few hours until their shell is penetrated with water and then push them to the bottom of the cup/glass using your fingertips. Allow the seeds to soak for 15 – 18 hours. The soaking process will moisten the shell of the seeds which makes it easy for them to germinate.
  3. Get a thick dye-free paper towel and place it on top of a plate. Place the soaked seeds in the paper towel and position them with enough spaces around each other. Fold the paper towel to envelop the seeds.
  4. Place it in a warm and dim area until the seeds start to crack. Make sure the seeds are well-moisturized so check it every 5-12 hours and use a spray bottle to add water onto it.
  5. Be patient. Seeds may take seven days or longer to germinate. Remember that each seed has a different germination phase.
  6. Once the taproot begins to appear, you can transplant your germinated sprouts to your desired growing medium. Make sure the taproot is facing downwards when you plant it.

Most marijuana seeds take 1 to 2 days to germinate, while others take a week. This depends on the thickness of their shells. Each seed has different features and physical characteristics, hence the difference during the germination process. If you follow all the steps of the germination method we mentioned above, you can expect 80% success rate.

Conclusion

Knowing the right way of germinating your marijuana seeds is vital in starting your weed production. You can choose from all the methods we have provided above. Just make sure that you give your plants everything it needs including food, light, and water. They should also be kept in a growing space with proper levels of humidity and temperature.

Establishing an ideal environment for your plants will help you avoid obstacles along the way. Above all, be organized and precise. Place your seedlings, seeds, and clones in a clear jar and label them. This will help you avoid confusion and expensive mistakes as you learn how to germinate marijuana seeds. Now go and get your pot production going!

Germinate Seeds in cup of water.

I was going to just put my seeds in a cup of room temp water to germinate. But ive read that this is not a good idea, because if the seed is in the water for over 24hours it gets no oxygen. Causing the seed to not crack open. Has any one had success with this method? It seems like an easier way then the paper towel method

norcaliiguy
Active Member
tea tree
Well-Known Member

THis is the only method I use. I let them soak until I see a long taproot. I used to just wait until I saw a taproot crack, in say 18hours, but the last few seeds I just let go a coupke of days and let these mega taproots grow. I then popped them into rapid rooters and a day later I have advanced seedlings rooted and fine. I am pleased. The paper towel method is bad, it means that little root hairs will get stuck to the paper towel and get stressed or damaged and also their is so much that can go wrong there and the worry over heat and cold is there where as with the cup of water nothing ever goes wrong. Hot or cold it always works.

See also  Wedding Cake Weed Seeds
DoeEyed
Well-Known Member

tea tree, what percentage rate of germination do you get doing that? Have you had any seeds drown doing it this way?

Mdot923
Active Member

THis is the only method I use. I let them soak until I see a long taproot. I used to just wait until I saw a taproot crack, in say 18hours, but the last few seeds I just let go a coupke of days and let these mega taproots grow. I then popped them into rapid rooters and a day later I have advanced seedlings rooted and fine. I am pleased. The paper towel method is bad, it means that little root hairs will get stuck to the paper towel and get stressed or damaged and also their is so much that can go wrong there and the worry over heat and cold is there where as with the cup of water nothing ever goes wrong. Hot or cold it always works.

What is rapid rooters? Im new to growing with seeds sry. Is there a limit to how many i can put in a cup?

bubbastickyfingers
Active Member
tea tree
Well-Known Member

lol, ah a class. I get 100 percent germination this way. I had lost some seeds before using the paper towel or just popping them into media. No paper towel is needed with the cup of water. Just dark. I, in fact use plain tapwater straight from the faucet. Not cold not hot. Then place them in the dark. Traditional knowledge says that when they sink they are ready to go into soil, rapid rooter, rockwool, etc, etc. However, I dont mess with that and simply wait until I thinj the taproot is out far enough for how I feel that day, lol. That simple.

Rapid rooters are a gift from god. Or whoever it is that makes them. Very nice. Google `em. Very cheap and very handy. A coco peat or something material that is meant for hydro or soil. I have used them succesfully 100 percent of the time for both. No lie. They are also the perfect cloning medium.

When a seed has the taproot I use tweezers and place it into a rapid rooter cube or cone. Then I take a little peice of anything handy and gently cover the whole in the rapid rooter cube. The seed needs darl to keep sprouting and take root. After a day or two tops the seed will be poking out. Then just let it go.

Here it gets tricky about half the time. Because the seed does not half to push thru dirt the shell is usually stuck so a little very very very areful nuding is sometimes needed or the plant will die in the shell. It is Very obvious when this happens and what needs to be done and is actually pretty fun to do. SO dont stress. Also I like to put a clear plastic cup over the rapid roooter or the patch of dirt I bury the germed seed to keep the humidity up.

Keep the rapid rooter soaked. Keep the dirt wet too. Whatever you use. Rapid rooters are impossible to overwater. If you sprout in dirt be careful and just wet the the toplaer so as the seed stays moist.

Mdot923
Active Member

lol, ah a class. I get 100 percent germination this way. I had lost some seeds before using the paper towel or just popping them into media. No paper towel is needed with the cup of water. Just dark. I, in fact use plain tapwater straight from the faucet. Not cold not hot. Then place them in the dark. Traditional knowledge says that when they sink they are ready to go into soil, rapid rooter, rockwool, etc, etc. However, I dont mess with that and simply wait until I thinj the taproot is out far enough for how I feel that day, lol. That simple.

Rapid rooters are a gift from god. Or whoever it is that makes them. Very nice. Google `em. Very cheap and very handy. A coco peat or something material that is meant for hydro or soil. I have used them succesfully 100 percent of the time for both. No lie. They are also the perfect cloning medium.

When a seed has the taproot I use tweezers and place it into a rapid rooter cube or cone. Then I take a little peice of anything handy and gently cover the whole in the rapid rooter cube. The seed needs darl to keep sprouting and take root. After a day or two tops the seed will be poking out. Then just let it go.

Here it gets tricky about half the time. Because the seed does not half to push thru dirt the shell is usually stuck so a little very very very areful nuding is sometimes needed or the plant will die in the shell. It is Very obvious when this happens and what needs to be done and is actually pretty fun to do. SO dont stress. Also I like to put a clear plastic cup over the rapid roooter or the patch of dirt I bury the germed seed to keep the humidity up.

Keep the rapid rooter soaked. Keep the dirt wet too. Whatever you use. Rapid rooters are impossible to overwater. If you sprout in dirt be careful and just wet the the toplaer so as the seed stays moist.

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.